Table of Contents
Advertisement
ICP DAS PMC/PMD Series User Manual
update on this page. For firmware update operations, please refer to
Update.
6.1
Time Setting
On the Time Setting page, it allows to set the time of PMC/PMD and Time
Synchronization function. The setting interface is as below:
When get into this page, the system will read and display current time of the
PMC/PMD. To modify the system time of PMC/PMD, set up the date and
time on the "Time Setting page section" and then click "save" to complete
the settings. The user could click on "Load" in the "Time Duplication" to
synchronize the system time of the computer where the browser located and
the system time of the PMC/PMD. The PMC/PMD also provides SNTP
Time Server function that allows to set up Time Synchronization to sync the
clock through network. The following figure illustrates the set up interface:
Figure6-2 :
Time Setting Page
6.9 Firmware
50
Advertisement
Table of Contents
