Step 13. Inspect Or Modify Midplane Board (W1312-63095 To A W1312-63376); N5242 - Keysight Technologies N524 A Series Installation Note

Description of this Upgrade

Step 13. Inspect or Modify Midplane Board (W1312-63095 to a W1312-63376)

Step 13. Inspect or Modify Midplane Board (W1312-63095 to a
W1312-63376)
If your instrument already has the correct W1312-63376 midplane board,
skip to
on page
STOP!!! Please read all content before proceeding with this upgrade
procedure. This is a complex procedure that requires Keysight support
training, before beginning any repairs. If you have not been properly
trained by Keysight support personnel, attempting to do this procedure
could result in damage to the midplane board and or the instrument! See
also
W1312-63376)," on page
If you do not have the following equipment, do not attempt to do the
process in the Appendix, because you may damage the board or your
instrument. Call the factory.
This process requires the following:
— Training by Keysight support personnel to perform this upgrade
— RoHS compliant soldering materials and components
— Variable power soldering iron for surface-mount components
— 10x magnifier or greater
— Else, you may damage your midplane board and or your instrument
This section is only required if the Midplane board is not a W1312-63376 part
number. If your midplane board does not require this modification, skip this
process and continue to the next step. After this section is completed, your
midplane board will be a W1312-63376 midplane board. Refer to
page
Installation Note N5242-90023
"Step 14. Install the Dress Panel on the New Front Panel Assembly"
37.
Appendix A: "Midplane Board Upgrade (W1312-63095 to a
36.
57.
Figure 8 on
35