Huawei NE05E Hardware Manual page 65

HUAWEI NE05E,NE08E
Hardware Guide
mainly describes how to quickly identify a physical interface board through the
short name of a board.
As shown in
board name and an extended name. An abbreviated board name includes the
board type, interface quantity, and interface rate. When boards have the same
abbreviated board name, they can be differentiated using extended names. An
extended name does not have special meanings and can be omitted.
Figure 3-19 Board short name (using ML1A as an example)
The following describes each part of an abbreviated board name:
●
●
DIP Switch
● This operation should be executed with caution. Use it under the guidance of
● After the configuration file is deleted, reset the DIP switches to 0, 0, 0, and 0. In
● The numeral indicates 1, and the letter indicates 0.
● The device password is deleted when the configuration file is deleted.
You can use the DIP switches to delete the configuration file loaded on the device.
Set DIP switches to 1, 1, 0, and 1. During startup, the device deletes the loaded
configuration file based on the DIF switch status. After the password is deleted,
Issue 05 (2023-03-31)
Figure 3-19, the short name of a board consists of an abbreviated
Board type M indicates an E-carrier interface board. The interface quantity is
represented using L or D, indicating 16 or 32 respectively. The interface rate is
represented using 1, indicating E1.
Board type E indicates an Ethernet interface board. The interface quality is
represented using an Arabic numeral. The interface rate is represented using
M or X, indicating FE/GE or 10GE respectively. Extended name F or T is used
to indicate an optical interface or electrical interface respectively.
NO TE
For the name of an Ethernet interface board, the interface rate and quantity rate are
in an order opposite to those for the names of other boards. For example, in EM4F (a
name of an Ethernet interface board), interface rate M comes before interface
quantity 4.
NO TICE
technical personnel.
this way, you do not need to delete the configuration file at each startup.
Copyright © Huawei Technologies Co., Ltd.
3 Hardware Description
57