Huawei NE05E Hardware Manual page 502

Hide thumbs Also See for NE05E:

Table of Contents

HUAWEI NE05E,NE08E

Hardware Guide

Turn the switch to position S to extend the interval for indicators to turn on. In this way, you can

observe the change more accurately. See

Figure 4-90 Testing the connectivity

Step 3 Slightly shake the RJ45 connector of the assembled network interface and repeat

Step 2. Make sure that each metal contact slice of the RJ45 connector reliably

contacts the core and contacts the contact point of the female network port of the

network cable tester.

Assembling Power Cables

This section describes how to assemble the OT terminals and cord end terminals

of power cables.

?.1. Assembling OT Terminals and Power Cables

This section briefs the components of ring terminals and power cables, and

describes the procedure for assembling them.

Prerequisites

Tools, Equipment and Materials

Wire stripper

Issue 05 (2023-03-31)

4 Hardware Installation and Parts Replacement

Table of Contents