Huawei NE05E Hardware Manual page 347

HUAWEI NE05E,NE08E
Hardware Guide
3.6.6.3 75-Ohm 16 x E1 Cables (Anea 96F-III)
On the device, Anea96 connectors are used to input and output 75-ohm E1
signals.
At one end of the 75-ohm 16 x E1 cable (Anea 96F-III), the Anea96 connector is
used to connect the 75-ohm E1 electrical interface on the board; the other end is
connected to the digital distribution frame (DDF). Make the connector as required
on site.
Structure
Figure 3-99
Figure 3-100
cable.
Figure 3-99 Appearance of the 75-ohm 16 x E1 cable
Figure 3-100 Structure of the 75-ohm 16 x E1 cable
Issue 05 (2023-03-31)
shows the appearance of the 75-ohm 16 x E1 cable (Anea 96F-III) .
shows the structure of the cable.
Copyright © Huawei Technologies Co., Ltd.
3 Hardware Description
Figure 3-101 shows the core of the
339