Huawei NE05E Hardware Manual page 472

HUAWEI NE05E,NE08E
Hardware Guide
----End
?.2. Expected Result
The section describes the expected result of the binding strap.
Figure 4-37
Figure 4-37 Bundling result of optical fiber
?.3. Precautions
Bundle the fibers as the follow items.
●
●
●
●
4.1.1.3.9 Assembling and Testing the Cable Connector
This section describes how to assemble the cable connector and how to test the
connectivity of the cable.
Assembling and Testing the E1 Coaxial Cable Connector
This section describes how to assemble the E1 coaxial cable connector and how to
test the connectivity of the cable.
?.1. Assembling the Straight BNC Male Connector with the Coaxial Cable
This section describes how to assemble the straight BNC male connector with the
coaxial cable.
Issue 05 (2023-03-31)
shows the bundling result.
It is only the mat side of the binding strap that contacts the optical fiber.
Arrange the optical fibers tidily into a bundle before bundling.
Bundle the optical fibers with appropriate tightness. Never bind them too
tight.
The space between two binding straps should not exceed 40 cm.
Copyright © Huawei Technologies Co., Ltd.
4 Hardware Installation and Parts Replacement
464