Huawei NE05E Hardware Manual page 434

HUAWEI NE05E,NE08E
Hardware Guide
When devices are installed into an IMB
network cabinet or APM30H cabinet
without a temperature control unit
(such as air conditioner or heat
exchanger), ensure that the IMB
network cabinet or APM30H cabinet is
not completely closed. The air intake
vent and air exhaust vent on the IMB
network cabinet or APM30H cabinet
must match air channels.
The metal wire of the optical cable
that is not in the overhead mode must
be fastened.
When the device is installed on a wall,
instead of using plastic or other parts,
use the mounting brackets and
expansion bolts delivered with the
device to fasten the device.
Issue 05 (2023-03-31)
Basic Installation Specifications
Copyright © Huawei Technologies Co., Ltd.
4 Hardware Installation and Parts Replacement
The corrugated tube does not enter
the network cabinet and the cut of the
corrugated tube is not smoothened.
Signal cables must be routed
separately from power cables.
Ensure that cable connectors and ports
do not face upwards.
426