Huawei NE05E Hardware Manual page 343

HUAWEI NE05E,NE08E
Hardware Guide
Technical Specifications
Table 3-360
Table 3-360 Technical specifications of the shielded cable
Item
Connector
X1/X2
Cable type
Number of
cores
Table 3-361
Table 3-361 Technical specifications of the non-shielded cable
Item
Connector
X1/X2
Cable type
Number of
cores
3.6.6.2 75-Ohm 16 x E1 Cables (Anea 96F-I)
On the device, Anea96 connectors are used to input and output 75-ohm E1
signals.
At one end of the 75-ohm 16 x E1 cable (Anea 96F-I), the Anea96 connector is
used to connect the 75-ohm E1 electrical interface on the board; the other end is
connected to the digital distribution frame (DDF). Make the connector as required
on site.
Structure
Figure 3-96
Figure 3-97
cable.
Issue 05 (2023-03-31)
lists the technical specifications of the shielded cable.
Specification
Network Interface Connector,8-Bit 8PIN,Shielded,Crystal Model
Connector,24-26AWG,Leads Single Solide Cabl
Twisted-Pair Cable,100ohm,Category 5e,FTP,0.52mm(0.0205 in.),
24AWG,8Cores,4Pairs,PANTONE 430U
Eight
lists the technical specifications of the non-shielded cable.
Specification
Network Interface Connector,8-Bit 8Pin,Non-Shielded,Crystal Plug
Twisted-Pair Cable,100ohm,,Category 5e UTP,0.51mm(0.0200 in.),
24AWG,8Cores,PANTONE 430U
Eight
shows the appearance of the 75-ohm 16 x E1 cable (Anea 96F-I).
shows the structure of the cable.
Copyright © Huawei Technologies Co., Ltd.
3 Hardware Description
Figure 3-98 shows the core of the
335