Huawei NE05E Hardware Manual page 17

HUAWEI NE05E,NE08E
Hardware Guide
Heat Dissipation
Figure 3-4 NE05E-S2 air duct
●
●
●
●
Technical Specifications
Table 3-4 Technical specifications of the NECM00HOST07
Item
Cabinet installation standards
Dimensions without packaging (H x W
x D) [mm(in.)]
Chassis height [U]
Weight without packaging [kg(lb)]
Weight without packaging (full
configuration) [kg(lb)]
Typical power consumption (with
configuration) [W]
Typical heat dissipation (with
configuration) [BTU/hour]
MTBF [year]
MTTR [hour]
Issue 05 (2023-03-31)
Heat dissipation holes of air intake and exhaust vents on NE05E-S2 must be
kept clean and unblocked.
A distance of at least 50 mm must be reserved at the air intake/exhaust vent
on NE05E-S2 to ensure good ventilation.
Filler panels must be installed on unused slots. In addition, on NE05E-S2, heat
must be dissipated by drawing in air from the left and expelling out the air
from the right.
When NE05E-S2 is installed in a cabinet, temperature inside the cabinet must
be within the temperature range and the air duct of the cabinet must be
consistent with that of NE05E-S2.
Copyright © Huawei Technologies Co., Ltd.
3 Hardware Description
Specification
R01S100 Outdoor Cabinet, ETSI(21-
inch), IEC(19-inch), IMB(3U)
44.5 mm x 442 mm x 220 mm (1.75 in.
x 17.4 in. x 8.66 in.)
1 U
3.2 kg (7.06 lb)
4.41 kg (9.72 lb)
30.9 W
100.2 BTU/hour
40 year
2 hour
9