Huawei NE05E Hardware Manual page 449

HUAWEI NE05E,NE08E
Hardware Guide
●
?.2. Type and Shape
There are two types of engineering labels for power cables and signal cables
respectively.
Label for Signal Cables
The label for signal cables is L-shaped with fixed dimensions, as shown in
4-16.
Figure 4-16 Label for signal cables
1.Dividing line
The dividing lines on the label help to specify more clearly the position of a cable.
For example, there is one between the cabinet number and the frame number and
another one between the frame number and the slot number. The dividing line is
1.5 mm x 0.6 mm in size with the color of PONTONE 656c (light blue).
The cut dotted line helps to fold the label when attaching it to the cable, and its
size is 1.0 mm x 2.0 mm.
There is a mark "TO:" (upside down in the figure) at the lower right corner of the
label. The mark is used to identify the opposite end of the cable on which the
label is attached.
Label for Power Cables
The label for power cables should be attached to the identification plate on the
cable ties that are bundled to the cable. The identification plate has an
Issue 05 (2023-03-31)
Laser printing or handwriting with oiliness markers
Copyright © Huawei Technologies Co., Ltd.
4 Hardware Installation and Parts Replacement
2.Cut dotted line
Figure
441