Huawei NE05E Hardware Manual page 50

HUAWEI NE05E,NE08E
Hardware Guide
Figure
Heat Dissipation
Figure 3-12 NE08E-S6E air duct
●
●
●
●
Issue 05 (2023-03-31)
Heat dissipation holes of air intake and exhaust vents on NE08E-S6E must be
kept clean and unblocked.
A distance of at least 50 mm must be reserved at the air intake/exhaust vent
on NE08E-S6E to ensure good ventilation.
Filler panels must be installed on unused slots. In addition, on NE08E-S6E,
heat must be dissipated by drawing in air from the left and expelling out the
air from the right.
When NE08E-S6E is installed in a cabinet, temperature inside the cabinet
must be within the temperature range and the air duct of the cabinet must be
consistent with that of NE08E-S6E.
Copyright © Huawei Technologies Co., Ltd.
Label Name
Fan warning label
Operation warning label
Qualification label
Product nameplate label
3 Hardware Description
Description
The label suggests that
do not touch the fan
leaves when the fan is
rotating.
The label indicates the
precaution that should
be taken for operations
on the PIU board.
The equipment is
qualified.
The label suggests the
product name and
certification.
42