Huawei NE05E Hardware Manual page 494

HUAWEI NE05E,NE08E
Hardware Guide
Step 7 Cut the cables straight along the edge of the connector cable tray C, as shown in
Figure
Figure 4-76 Cutting the cables
Step 8 Lead the connector cable tray through the connector body D, and rotate the metal
shield shell 90 degree to push the cable tray inward, as shown in
Figure 4-77 Inserting the cable tray through the connector body
Make sure the connector cable tray is inserted to the bottom of the connector
body.
Step 9 Move the connector metal shell B toward the connector body to envelop the
connector body and connector cable tray. Then, use the crimper to crimp the
connector, as shown in
Issue 05 (2023-03-31)
4-76.
CA UTION
Figure
Copyright © Huawei Technologies Co., Ltd.
4 Hardware Installation and Parts Replacement
4-78.
Figure 4-77.
486