Huawei NE05E Hardware Manual page 492

HUAWEI NE05E,NE08E
Hardware Guide
Figure 4-70 Leading the connector metal sleeve
Step 4 Lead the connector metal sleeve to the root of the twisted pair cable sleeve. Cut
the shield layer and aluminum foil straight along the edge of the metal sleeve
without leaving any aluminum wires. Expose the twisted pair G, which is about 20
mm long, as shown in
Figure 4-71 Stripping the shield layer of the twisted pair cable
Step 5 Lead the four pairs of twisted cables, which are marked in different colors,
through the connector cable tray C respectively according to the colors. See
4-72
Figure 4-72 Leading twisted pair cables through connector cable tray
Issue 05 (2023-03-31)
Figure
and Figure 4-73.
Copyright © Huawei Technologies Co., Ltd.
4 Hardware Installation and Parts Replacement
4-71.
Figure
484