Huawei NE05E Hardware Manual page 353

HUAWEI NE05E,NE08E
Hardware Guide
Item
Core diameter of
the inner conductor
Number of cores
3.6.6.5 120-Ohm 16 x E1 Cables (Anea 96F-II)
On the device, Anea96 connectors are used to input and output 120-ohm E1
signals.
At one end of the a 120-ohm 16 x E1 cable (Anea 96F-II), the Anea96 connector is
used to connect the 120-ohm E1 electrical interface on the board; the other end is
connected to the DDF. Make the connector as required on site.
Structure
Figure 3-104
and
Figure 3-104 Appearance of the 120-ohm 16 x E1 cable
Figure 3-105 Structure of the 120-ohm 16 x E1 cable
Issue 05 (2023-03-31)
Specification
0.4 mm(0.02 in.)
32 twisted pairs
shows the appearance of the 120-ohm 16 x E1 cable (Anea 96F-II)
Figure 3-105 shows the structure of the cable.
Copyright © Huawei Technologies Co., Ltd.
3 Hardware Description
345