Huawei NE05E Hardware Manual page 532

HUAWEI NE05E,NE08E
Hardware Guide
11
-------------------------------------------------------------------------------
NE05E-SQ's Device status:
-------------------------------------------------------------------------------
Slot # Type
-------------------------------------------------------------------------------
2
5
7
-------------------------------------------------------------------------------
NE05E-SR's Device status:
Slot #
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
2
5
----End
Follow-up Procedure
After replacing a part, collect the tools. If the part is faulty, maintenance personnel
should fill in the Offsite Repair Card for Faulty Materials, and send the card and
the faulty part to Huawei for timely maintenance.
4.1.2.4 Replacing the Control Board
4.1.2.4.1 Replacing the Control Board in 1+1 Protection Mode
Impact on the System
Replacing the control board in 1+1 protection will not affect services.
Precautions
Avoid direct eye exposure to the laser beam launched from the optical interface
board or fiber.
● To ensure valid part replacement, when replacing the control board, contact
● When replacing a part, make sure that the interface is not connected to any
● Optical interfaces and optical fiber connectors must be clean. Optical fiber
Issue 05 (2023-03-31)
FAN Present Registered Normal OTHER 0
Online Register
CXP Present Registered Normal
PWR Present Registered Normal
FAN Present Registered Normal
Type Online Register
CXP Present NA
PWR Present Registered
D ANGER
NO TICE
Huawei engineers to determine whether a license needs to be applied for. You
can apply for a license or use Stick License to activate some license control
items.
optical fibers or cables.
connectors must be properly capped to keep dusts away.
Copyright © Huawei Technologies Co., Ltd.
4 Hardware Installation and Parts Replacement
NA
Status Role LsId Primary
MMB 0 Master
OTHER 0 NA
OTHER 0 NA
Status Primary
Normal Master
Normal NA
524