Huawei NE05E Hardware Manual page 469

HUAWEI NE05E,NE08E
Hardware Guide
The binding strap for optical fiber is 12.7 mm wide, with one hook side
(transparent polypropylene material) and one mat side (black nylon material).
The architecture of the binding strap ,as shown in
Figure 4-32 Binding strap
1. Hook side
?.2. Cutting
This procedure cutting the binding strap after installing the fiber jumpers.
Prerequisites
None
Tools, Equipment and Materials
●
●
Precautions
Procedure
Step 1 Install the binding strap on the plastic axis of the cutterbar, as shown in
4-33.
Issue 05 (2023-03-31)
Cutterbar
Binding strap
NO TE
You can use a pair of scissors if there is no cutterbar on site.
Copyright © Huawei Technologies Co., Ltd.
4 Hardware Installation and Parts Replacement
Figure 4-32.
2. Mat side
Figure
461