Huawei NE05E Hardware Manual page 499

HUAWEI NE05E,NE08E
Hardware Guide
Figure 4-84 Metal contact slices of inconsistent height
Figure 4-85 Metal contact slices of consistent height
Step 2 Hold the RJ45 connector and slant it to a 45-degree angle. Side-glance the top
edge of each metal contact slice.
Figure 4-86 Metal contact slices of inconsistent parallelism and height
Issue 05 (2023-03-31)
NO TE
If the RJ45 connector does not meet the requirement, crimp the RJ45 connector again and
make sure the RJ45 connector meets the requirement.
Copyright © Huawei Technologies Co., Ltd.
4 Hardware Installation and Parts Replacement
Figure 4-86 an unqualified RJ45 connector.
491