Huawei NE05E Hardware Manual page 545

Hide thumbs Also See for NE05E:

Table of Contents

HUAWEI NE05E,NE08E

Hardware Guide

Step 6 Insert the new optical module into the optical interface.

An optical module must not be inserted inversely. If you cannot completely insert

an optical module into the interface, do not push it. Instead, you should reverse it

and insert it into the interface again.

Issue 05 (2023-03-31)

Remove the optical cables from the connector and cover the optical cable

connector with a dust cap.

If optical interfaces are concave in the board panel and difficult to remove by hands,

use a fiber extractor to unfold the handle of the optical module and pull it out.

Turn the pulled handle of the optical module downward, as shown in the

Hold the handle to pull out the optical module carefully from the optical

interface, as shown in the figure.

Place the removed optical module in the ESD bag.

4 Hardware Installation and Parts Replacement

Table of Contents