Huawei NE05E Hardware Manual page 460

HUAWEI NE05E,NE08E
Hardware Guide
Content
MN-Z
Example of the Label
Figure 4-26
Figure 4-26 Example of the label on the Ethernet cable
"A01-03-10-05" indicates that on the local end of the Ethernet cable is connected
to Ethernet Port 05, Slot 10, Frame 03 of the cabinet on Row A, Column 01 in the
equipment room.
"B02-03-12" indicates that the opposite end of the Ethernet cable is connected to
Ethernet Port 12, Frame 03 of the cabinet on Row B, Column 02 in the equipment
room.
?.4. Engineering Labels of the Fibers Between Two Devices
These labels are attached to the fibers that connect the optical interfaces on the
boards in a frame, or on the device boxes. There are two types of labels for fibers:
one is for the fiber that connects the optical interfaces on two devices, the other is
for the fiber that connects the device and the optical distribution frame (ODF).
Issue 05 (2023-03-31)
Meaning
B: frame
number
C: physical
slot number
D: Ethernet
port number
MN: cabinet
number
Z: location
number
shows the label on the Ethernet cable:
Copyright © Huawei Technologies Co., Ltd.
4 Hardware Installation and Parts Replacement
Example
Numbered in top-down order with two digits,
for example, 01
Numbered in top-down and left-right order
with two digits, for example, 01
Numbered in top-down and left-right order
with two digits, for example, 01
For example, B02
Valid location number of the terminal device
onsite. If the cable is connected to a router in a
cabinet, the serial numbers of the cabinet, the
frame and the Ethernet interface of the router
should be specified, for example, B02-03-12. If
the cable is connected to the network
management station (NMS), specific location
of the NMS should be given.
452