Huawei NE05E Hardware Manual page 438

HUAWEI NE05E,NE08E
Hardware Guide
Figure 4-10 Board carton
Step 3 Open the carton and check whether the number and type of the boards are
consistent with what is marked on the carton label. Check that there is no evident
damage on the board package.
Step 4 Open the board box and take the board out of the shielding bag.
●
●
●
●
Step 5 Check whether the board is physically damaged or is not in line with the packing
list.
local representatives of Huawei.
Issue 05 (2023-03-31)
NO TE
● Each board is packed in both a cushion foam and an shielding bag. Keep the bags
properly. They can be used later for keeping the boards or packing the damaged boards
returned for repair.
● The ambient temperature and humidity may have an impact on the boards. In each
shielding bag there is a small bag of desiccant, which shall not be thrown away.
● Wait for at least 30 minutes before unpacking if the board is just moved from a cold,
dry place to a warm, damp place. Otherwise, moisture will condense on the board
surface and damage the components.
Hold the bottom of the shielding bag with the left hand.
Take the board out of the bag gently by its front panel with the right hand.
Do not touch any electronic component on the board surface to avoid
damage.
Keep the bags properly.
Table 4-15 lists the checklist. In this case of any damage to the board, contact
Copyright © Huawei Technologies Co., Ltd.
4 Hardware Installation and Parts Replacement
430