Huawei NE05E Hardware Manual page 467

HUAWEI NE05E,NE08E
Hardware Guide
●
●
●
●
●
●
●
●
●
Figure 4-31
Issue 05 (2023-03-31)
Bundling of the cable should be tidy, clear and elegant. As a general rule,
cables are grouped by types, or grouped as needed when they are in a large
number. Bind them with cable ties and route them in either upward or
underfloor cabling mode in the cabling area at the two sides of the cabinet.
Cables must be bundled when arranged in ducts. Bind the cables closely with
appropriate tightness. The space between the cable ties should be even and
the overall appearance of the cabling nice.
You may not bind the cables when arranged in cable troughs. But they should
be placed tidy and straight in the trough with no crossover. Moreover, the
cables can not overflow the trough. At two ends and turnings of the trough,
use a plastic clip for the cables.
Cables both inside and outside the cabinet must be bundled. Keep the cables
bundled closely and neatly.
Use cable ties of different specifications for cables according to actual
circumstances.
Do not connect two cable ties in bundling. Otherwise, the binding strength
will be weakened.
After the bundling, cut the remaining part of the cable tie smoothly, removing
all burrs.
The space between the cable ties is even and is three or four times the size of
the bundle diameter.
When making turning for the bundled cable, keep the bend radius as big as
possible to avoid breaking the cable cores at the turning.
shows the specific operation of bundling.
Copyright © Huawei Technologies Co., Ltd.
4 Hardware Installation and Parts Replacement
459