Mitsubishi MOTORS Outlander 2019 Owner's Manual page 92

Keyless entry system (if so equipped)
keys to your authorized Mitsubishi Motors
dealer.
NOTE
 You are provided with 2 remote control
transmitters, but you may register up to 8
remote control transmitters.
5
Customer remote control trans-
mitter programming (Except
for vehicles sold in Canada)
You can program new remote control trans-
mitters to the system if you have one valid
(already registered) remote control transmit-
ter by doing the following:
1. Have available all (current and new)
remote control transmitters you wish to
register.
2. With a valid (already registered) remote
control transmitter, press the UNLOCK
button (2) for 4 to 10 seconds. Then press
and hold the LOCK button (1).
3. Within 10 seconds of pressing the LOCK
button, release the LOCK and UNLOCK
buttons in sequence.
5-10 Features and controls
At this time, ID codes for all remote con-
trol transmitters except for the transmitter
used in steps 2 and 3 are erased and the
answerback function (door is locked and
unlocked) informs you that the registra-
tion mode has been activated.
4. Within 60 seconds after step 3, complete
the following ID code registration opera-
tion using the next remote control trans-
mitter you wish to register within 4
seconds.
i) Press both the LOCK and UNLOCK
buttons for 2 seconds.
ii) Release both the LOCK and UNLOCK
N00544001220
buttons for 1 second.
iii) Press the UNLOCK button. The
answerback function informs you that the
ID code registration of the transmitter is
completed.
5. To register the ID codes of additional
remote control transmitters, repeat step 4
within 60 seconds after step 4.
6. If no ID code of a remote control trans-
mitter is registered within 60 seconds
after step 4, the registration mode is can-
celed and the normal mode returns.
NOTE
 For verification purposes, try to lock and
unlock the doors after the registration is
completed.
NOTE
 The indicator light (4) comes on each time a
button is pressed.
 The keyless entry system does not work if
the key is in the ignition switch.
 The remote control transmitter can be used
from approximately 40 feet (12 m) away.
However, this distance may change if your
vehicle is near a TV transmitting tower, a
power station, or a radio station.
 If the following conditions are observed after
pressing the LOCK (1) or UNLOCK (2) but-
ton on the remote control transmitter, the
battery in the remote control transmitter may
need to be replaced.
• The doors and the liftgate cannot be locked
or unlocked.
• The panic alarm cannot be operated.
• The indicator light (4) is dim or does not
come on.
 If you lose your remote control transmitter,
please contact an authorized Mitsubishi
Motors dealer for a replacement.
 If you wish to obtain an additional remote
control transmitter, please contact an autho-
rized Mitsubishi Motors dealer. A maximum
of 8 remote control transmitters can be pro-
grammed for your vehicle.