Mitsubishi MOTORS Outlander 2019 Owner's Manual page 110

Free-hand Advanced Security Transmitter (F.A.S.T.-key) (if so equipped)
Additional F.A.S.T.-keys
To add a F.A.S.T.-key, you must already have
2 registered F.A.S.T.-keys. You need to regis-
ter the ID code to the vehicle.
Registering the ID code can be done by your
authorized Mitsubishi Motors dealer. Or it
5
can be done by yourself (except for vehicles
sold in Canada).
For you to register the ID code yourself, fol-
low the "Customer F.A.S.T.-key program-
ming" procedure below.
If you choose to have your authorized
Mitsubishi Motors dealer register the ID
code, take your vehicle and all remaining
F.A.S.T.-keys to your authorized Mitsubishi
Motors dealer.
NOTE
 You are provided with 2 F.A.S.T.-keys, but
you may register up to 4 F.A.S.T.-keys.
You can obtain blank F.A.S.T.-keys specially
cut for your vehicle from your Mitsubishi
Motors dealer.
5-28 Features and controls
Customer F.A.S.T.-key program-
ming (Except for vehicles sold in
N00561100014
Canada)
You can program new F.A.S.T.-keys to the
system if you have two valid (already regis-
tered) F.A.S.T.-keys and a blank (not regis-
tered) F.A.S.T.-key.
For F.A.S.T.-key programming, follow the
procedures below.
1. Open the driver's door.
NOTE
 Keep the driver's door open until F.A.S.T.-
key programming is finished. Do not open or
close other doors.
2. While carrying the first valid F.A.S.T.-
key, put the operation mode in ON. (Per-
form the following procedure within 30
seconds.)
3. Insert the new F.A.S.T.-key into the key
slot in the illustrated direction.
N00561201227
4. With the first valid F.A.S.T.-key, press the
UNLOCK button for 4 to 10 seconds and
press the LOCK button during this time.
5. Release in sequence the LOCK and
UNLOCK buttons within 10 seconds of
pressing the LOCK button in step 4. (Per-
form the following procedure within 30
seconds.)
6. With the second valid F.A.S.T.-key, press
the UNLOCK button for 4 to 10 seconds
and press the LOCK button during this
time.