Mitsubishi MOTORS Outlander 2019 Owner's Manual page 189

Cruise control switch
1- "ACC ON/OFF" switch
Used to turn on and off the ACC sys-
tem.
2- "SET -" switch
Used to set a desired speed or to reduce
the set speed.
3- "RES +" switch
Used to resume the control function
after cancelling the ACC or the conven-
tional cruise control.
Also used to increase the set speed.
4- "CANCEL" switch
Used to cancel the control function of
the ACC or the cruise control.
5- ACC distance switch
Used to set or change the following dis-
tance between your vehicle and a vehi-
cle in front.
NOTE
 Operate the individual switches correctly and
N00577000021
one after another.
The ACC may be turned off or its control
function may be cancelled if two or more
switches are pressed concurrently
ACC Indicators
While the ACC is turned on, indicators for
the ACC are shown in the multi information
display.
1- ACC indicator:
Indicating that the ACC is turned on.
2- Control state indicator:
Indicating that ACC is activated.
Adaptive Cruise Control System (ACC) (if so equipped)
3- Set speed indicator:
Indicating the set speed.
If the set speed is not set, "---" is
shown.
4- Front vehicle indicator:
Indicating when the ACC detects a
vehicle ahead.
When a front vehicle is detected while
the ACC is activated, the 'Active' front
vehicle indicator shown in the illustra-
N00577100035
tion below will illuminate.
When a front vehicle is detected while
the ACC is not activated or the ACC is
canceled, the 'Stand by' front vehicle
indicator will illuminate.
Display
Vehicle in
front detected
Features and controls
5
State
Stand by Active
5-107