Mitsubishi MOTORS Outlander 2019 Owner's Manual page 175

NOTE
• If this warning appears, confirm that all of
the conditions for system operation are met
and that there is no malfunction in the sys-
tem.
• If this warning appears, fasten the driver's
seat belt.
 If any of the following occur while the sys-
tem is standby state, the brake auto hold sys-
tem will be turned off automatically and the
indicator light on the switch goes off.
A buzzer will sound and the message will
appear on the information screen in the multi
information display.
• When the driver's seat belt is unfastened.
• When the driver's door is opened.
• When there is a malfunction in the system
NOTE
 If keeping pressing the brake auto hold
switch after setting the brake auto hold to
ON (stand by), the brake auto hold will
return to OFF as a protection function is
operated.
After returning to OFF, the brake auto hold
will not be switched to ON (Stand by) even if
the brake auto hold switch is pressed. To set
the brake auto hold to ON, restart the engine
and press the brake auto hold switch again.
To activate brake auto hold
When the vehicle is stopped by depressing
the brake pedal with the selector lever in any
position other than "P" (PARK) or "R"
(REVERSE), the brake auto hold activates
and the vehicle will be held stationary.
The brake auto hold indicator light in the
instrument cluster will come on while the
system activates.
Brake auto hold (if so equipped)
CAUTION
 Release the brake pedal only after the brake
auto hold indicator light has illuminated.
NOTE
 In the following situations, the brake auto
hold system may not operate temporarily.
• The vehicle is stopped on a slippery road.
• The vehicle was stopped while the steering
wheel was turned all the way to the left or
right.
• The vehicle is being turned on a parking lot
turntable.
If this occurs, the brake auto hold system
will return to the normal operation if you
depress the accelerator pedal and the vehicle
starts moving again.
 If the following operation is performed, the
brake auto hold will be deactivated and the
brake auto hold indicator light in the instru-
ment cluster goes off.
• When shifting the selector lever to the "P"
(PARK) or "R" (REVERSE) position with
depressing the brake pedal.
• When the Electric parking brake is applied
or
by using the Electric parking brake switch.
Features and controls
5
5-93