Mitsubishi MOTORS Outlander 2019 Owner's Manual page 372

Tire repair kit (if so equipped)
CAUTION
 Immediately wash clothes contaminated with
tire sealant. The tire sealant may not be
removed from the clothes.
NOTE
 Do not pull out an object, such as a nail or
screw, that penetrates the punctured tire.
 Move the vehicle so that the tire valve is
positioned away from the point where the
tire touches the ground. If the valve is near
the point where the tire touches the ground,
8
the sealant may not enter the tire easily.
 Check the tire sealant's expiration date regu-
larly, and be sure to purchase a new one from
an authorized Mitsubishi Motors dealer
before the expiration date.
1. Park the vehicle on a safe, flat and level
place.
2. Set the parking brake firmly.
3. Move the selector lever to the "P"
(PARK) position, and stop the engine.
4. Turn on the hazard warning lights and set
up a warning sign, such as a warning tri-
angle or flashing signal lamp, at an ade-
quate distance from the vehicle, and have
all your passengers leave the vehicle.
5. Take out the tire repair kit.
Make sure that the compressor switch is
OFF.
8-8 For emergencies
6. Shake the tire sealant bottle well.
NOTE
 In cold conditions (when the ambient tem-
perature is 32 °F {0 °C} or lower), thicken-
ing of the tire sealant can make the tire
sealant hard to squeeze out of the bottle.
Warm the bottle between your hands inside
the vehicle.
7. Take the valve cap (D) off the tire valve
(E).
8. Unwind the bottle hose (F) from around
the sealant bottle.
9. Pull out the compressor's hose (G) from
the bottom of the compressor and securely
attach it to the valve (H) of the bottle by
turning it clockwise until tight.