Multi Information display - Type 1
Changing the temperature unit
The temperature display unit can be switched.
1. Press and hold the multi information dis-
play switch (for about 2 seconds or more)
to switch from the setting mode screen to
5
the menu screen.
Refer to "Changing the function settings"
on page 5-169.
2. Lightly press the multi information dis-
play switch to select "
unit setting).
3. Press and hold the multi information dis-
play switch (for about 2 seconds or more)
to switch in from °C to °F, or from °F to
°C.
The setting is changed to the selected tem-
perature unit.
NOTE
The temperature value on air conditioner
panel is switched in conjunction with outside
temperature display unit of the multi infor-
mation display.
However, "°F" or "°C" are not shown to tem-
perature display of an air conditioner.
5-172
Features and controls
NOTE
On vehicles equipped with the Smartphone
N00557201196
Link Display Audio, the temperature value
of the Smartphone Link Display Audio is
switched in conjunction with outside temper-
ature display unit of the multi information
display.
If the battery is disconnected, the memory of
the unit setting is erased and is automatically
set to °F (°C).
Changing the display language
" (temperature
The language of the multi information display
can be changed.
1. Press and hold the multi information dis-
play switch (for about 2 seconds or more)
to change from the setting mode screen to
the menu screen.
Refer to "Changing the function settings"
on page 5-169.
2. Lightly press the multi information dis-
play switch to select "LANGUAGE" (lan-
guage setting).
3. Press and hold the multi information dis-
play switch (for about 2 seconds or more)
N00557301184
to display "LANGUAGE" (language set-
ting).
4. Lightly press the multi information dis-
play switch to select the desired language.
5. Press and hold the multi information dis-
play switch (for about 2 seconds or more)
to change the setting to the selected lan-
guage.
NOTE
If the battery is disconnected, the memory of
the language setting is erased and is automat-
ically set to ENGLISH.
If "---" is selected in the language setting, a
warning message is not displayed when there
is a warning display or interrupt display.