Mitsubishi MOTORS Outlander 2019 Owner's Manual page 187

To temporarily decrease the speed
Depress the brake pedal to decrease the
speed. To return to the previously set speed,
push up the "RES +" switch (C).
Refer to "To resume the set speed" on page
5-106.
To deactivate
The set speed driving can be deactivated as
follows:
 Press the CRUISE CONTROL ON/OFF
switch (A) (Cruise control will be turned
off.)
 Press the "CANCEL" switch (D).
 Depress the brake pedal.
The set speed driving is deactivated automati-
cally in any of the following ways.
 When your speed slows to approximately
10 mph (15 km/h) or more below the set
speed because of a hill, etc.
 When your speed slows to approximately
25 mph (40 km/h) or less.
 When the active stability control (ASC)
starts operating. (if so equipped)
N00518801663
Refer to "Active stability control (ASC)"
on page 5-99.
WARNING
 Although the set speed driving will be
deactivated when shifting to the "N"
(NEUTRAL) position, never move the
selector lever to the "N" (NEUTRAL)
position while driving.
You would have no engine braking and
could cause a serious accident.
Cruise control (if so equipped)
Also, the set speed driving may be deacti-
vated as follow:
 When the engine speed rises and
approaches the tachometer's red zone (the
red-coloured part of the tachometer dial).
CAUTION
 When the set speed driving is deactivated
automatically in any situation other than
those listed above, there may be a system
malfunction.
Press the CRUISE CONTROL ON/OFF
switch to turn off the cruise control and have
your vehicle inspected by an authorized Mit-
subishi Motors dealer or a repair facility of
your choice.
Features and controls
5
5-105