Inside Liftgate Release; Theft-Alarm System - Mitsubishi MOTORS Outlander 2019 Owner's Manual

Table of Contents

Advertisement

NOTE
 The power liftgate easy closer operates even
when the power liftgate main switch is OFF.
 Repeated continuous operation of the handle
could activate the protection circuit and tem-
porarily prevent the power liftgate easy
closer from operating.
If this occurs, wait about 1 minute before
operating the power liftgate easy closer
again.

Inside liftgate release

The inside liftgate release is designed to pro-
vide a way to open the liftgate if the battery is
dead or disconnected.
The liftgate release lever (see illustration) is
mounted on the liftgate.
You and your family should familiarize your-
selves with the location and operation of the
liftgate release lever.
To open
1. Open the lid (A) inside of the liftgate.
N00523101084
2. Move the lever (B) to open the liftgate.
Inside liftgate release
Liftgate
Power liftgate
3. Push out on the liftgate to open it.
CAUTION
 Always keep the release lever lid on the lift-
gate closed when driving so that your lug-
gage cannot accidentally bump the lever and
open the liftgate.

Theft-alarm system

The theft-alarm system is designed to provide
protection from unauthorized entry into the
vehicle. This system is operated in three
stages: the first is the "armed" stage, the sec-
ond is the "alarm" stage, and third is the "dis-
armed" stage. If triggered, the system
provides both audible and visual alarm sig-
nals.
Features and controls
5
N00510201267
5-45

Advertisement

Table of Contents
loading

Table of Contents