Multi Information Display - Type 1 - Mitsubishi MOTORS Outlander 2019 Owner's Manual

Multi Information display - Type 1

Type B
5
Tachometer
The tachometer shows engine revolutions per
minute. This allows the driver to determine
the most efficient selector position and engine
speed combinations.
This gauge also assists in evaluating engine
performance.
5-156 Features and controls
CAUTION
 The red zone indicates an engine speed
beyond the range of safe operation.
Select the correct selector position to control
the engine speed so that the tachometer indi-
cator does not enter the red zone.
Meter illumination control
(Vehicle equipped with the
multi information display -
Type 1)
N00519201303
Each time you press this button, there is a
sound and the brightness of the instruments
changes.
1- Brightness level
2- Rheostat illumination button
NOTE
 You can adjust to 8 different levels for when
the front side-marker lights are illuminated
and when they are not.
 If the vehicle is equipped with the automatic
light control, the light switch is in a position
other than the "OFF" position and it is suffi-
ciently dark outside the vehicle, the meter
illumination switches automatically to the
adjusted brightness.
 The brightness level of the instruments is
stored when the ignition switch is turned to
the "OFF" or "LOCK" position or the opera-
tion mode is put in OFF.
 If you press and hold the button for longer
N00554901280
than approximately 2 second when the front
side-marker lights are illuminated, the
brightness level changes to the maximum
level. Pressing and holding the button for
longer than approximately 2 second again
returns the brightness level to the previous
level.
Multi Information display -
Type 1
The multi information display displays warn-
ings, the odometer, trip odometer, service
reminder, engine coolant temperature, fuel
remaining, outside temperature, selector lever
N00555001422