Mitsubishi MOTORS Outlander 2019 Owner's Manual page 207

CAUTION
• Do not put anything including a sticker or
film to the outer side of the windshield in
front of or surrounding area of the sensor.
Also, do not put anything including a
sticker or film to the inner side of the wind-
shield under the sensor.
• Do not attempt to detach or disassemble the
sensor.
• If the windshield is misted, remove the mist
from the windshield by using the defogger
switch.
• Maintain the wiper blades in good condi-
tion. Refer to "Wiper blades" on page 9-45.
When replacing the wiper blades, use only
Mitsubishi Motors Genuine parts or equiva-
lent.
• Do not dirty or damage the sensor.
• Do not spray glass cleaner on the sensor.
Also, do not spill liquid, such as a bever-
age, to the sensor.
• Do not install an electronic device, such as
antenna, or a device that emits strong elec-
tric waves, near the sensor.
Forward Collision Mitigation System (FCM) (if so equipped)
CAUTION
• Always use tires of the same size, same
type and same brand, and which have no
significant wear differences.
• Do not modify the vehicle's suspensions.
 If the windshield on the sensor or in the sur-
rounding area of the sensor is cracked or
scratched, the sensor may not detect an
object properly. This could cause a serious
accident. Turn off the FCM and have your
vehicle inspected as soon as possible at an
authorized Mitsubishi Motors dealer.
If you need to replace the windshield, con-
tact an authorized Mitsubishi Motors dealer.
 The sensor emits infrared rays when the
operation mode is in ON. Do not look into
the sensor by using optical goods such as a
magnifying glass. The infrared ray might
injure your eyes.
Laser radar specifications
FDA Assertion number: 1520863-000
Laser classification
Max average power 45 mW
Pulse duration 33 ns
Wavelength 905 nm
Divergent angle
28° x 12°
(horizon x vertical)
Laser classification label
For vehicles sold in U.S.A.
For vehicles sold in Canada
Laser explanatory label
Features and controls
5
5-125