Mitsubishi MOTORS Outlander 2019 Owner's Manual page 165

CAUTION
 Driving on dry, paved roads in "4WD
LOCK" mode causes increased fuel con-
sumption and noise.
NOTE
 The drive mode can be switched while driv-
ing or stopped.
Drive mode indicator
Normally the indicator illuminates when the
operation mode put in ON, and then the drive
mode is displayed a few seconds after the
engine is started.
The status of each drive mode display is as
follows.
Drive mode indicator
color liquid
Drive Mode
crystal dis-
play meter
4WD ECO 4WD ECO
4WD AUTO 4WD AUTO
4WD LOCK 4WD LOCK
On vehicles with color liquid crystal display
meter, the drive mode is displayed as an inter-
rupt display on the information screen in the
multi information display when the drive
mode is switched.
After a few seconds, the information screen
returns from the drive mode display to the
previous screen.
Drive mode
4WD ECO
N00549401030
4WD AUTO
mono-color
4WD LOCK
liquid crys-
tal display
meter
4WD-E
—
LOCK
Electronically controlled 4WD system (if so equipped)
CAUTION
 If the selected drive mode indicator begins
blinking, the drive mode will automatically
switch to protect the drive-system compo-
nents. A warning will also be displayed in
the information screen in the multi informa-
tion display.
Warning display (color liquid crystal dis-
play)
Display
Reduce speed and, if the indicator stops
blinking, you may resume normal driving.
For vehicles equipped with mono-color liq-
uid crystal display meter, drive mode indica-
tor ("4WD-E",
alternately
"LOCK") is blinking
Features and controls 5-83
5