Mitsubishi MOTORS Outlander 2019 Owner's Manual page 90

Keyless entry system (if so equipped)
The front side-marker and parking lights will
also turn on for approximately 30 seconds.
Refer to "Welcome light" on page 5-217.
NOTE
 If the UNLOCK button (2) is pressed and no
doors or the liftgate are opened within
5
approximately 30 seconds, the doors and the
liftgate will automatically re-lock.
On a vehicle equipped with the Smartphone
Link Display Audio, the functions can be
adjusted on the screen. For details, refer to
the separate owner's manual.
 The door and liftgate unlock function can be
set so that all doors and liftgate unlock when
the UNLOCK button (2) is pressed once.
Refer to "Setting of door and liftgate unlock
function" on page 5-9.
Answerback function
The horn and turn signal lights of the keyless
entry system answerback function can be
changed as required. This is done with the
key removed from the ignition switch.
NOTE
 The answerback function will not operate if
any of the doors are open.
5-8 Features and controls
Horn deactivation/reactivation
The answerback function can be set in the
following three ways.
Each time the answerback function is set, a
chime will sound to tell you the condition of
the answerback function.
One chime: The horn will not sound.
Two chimes: The horn will sound.
Four chimes: The horn will sound if the
LOCK button is pressed twice
within 1 second.
1. Remove the key from the ignition switch.
2. Open the driver's door and turn the com-
bination headlights and dimmer switch to
the "OFF" position.
3. Press the LOCK button (1) for 4 to 10 sec-
onds and press the UNLOCK button (2)
during this time.
4. Release in sequence the UNLOCK and
LOCK buttons within 5 seconds of press-
ing the UNLOCK button in step 3.
NOTE
 On a vehicle equipped with the Smartphone
Link Display Audio, the functions can be
adjusted on the screen. For details, refer to
the separate owner's manual.
Turn signal lights deactiva-
tion/reactivation
The answerback function can be turned ON
or OFF separately.
1. Remove the key from the ignition switch.
2. Open the driver's door and turn the com-
bination headlights and dimmer switch to
the "OFF" position.
3. Press the UNLOCK button (2) for 4 to 10
seconds and press the LOCK button (1)
during this time.
4. Release in sequence the UNLOCK and
LOCK buttons within 5 seconds of press-
ing the LOCK button in step 3.
Number of
To lock To unlock
chimes
One chime One flash Two flashes
Two chimes One flash No flash
Three chimes No flash Two flashes
Four chimes Two flashes One flash
Five chimes No flash One flash
Six chimes Two flashes No flash
Seven
No flash No flash
chimes