Mitsubishi MOTORS Outlander 2019 Owner's Manual page 252

Multi Information display - Type 1
Refer to "Changing the time until "REST
REMINDER" is displayed" on page
5-174.
Refer to "Changing the turn signal sound"
on page 5-174.
Refer to "Changing the momentary fuel
consumption display" on page 5-174.
Refer to "Tire ID set change" on page
5
5-143.
Refer to "Returning to the factory set-
tings" on page 5-174.
NOTE
 If the battery is disconnected, these function
settings are reset from memory and is auto-
matically to the factory settings (except the
tire ID set).
 You cannot select an item that is displayed
dimly on the menu.
Changing the reset mode for aver-
age fuel consumption and average
speed
You can change the mode condition for the
average fuel consumption and average speed
display to "Auto reset" or "Manual reset."
5-170 Features and controls
1. Press and hold the multi information dis-
play switch (for about 2 seconds or more)
to switch from the setting mode screen to
the menu screen.
Refer to "Changing the function settings"
on page 5-169.
2. Lightly press the multi information dis-
play switch to select "AVG" (average fuel
consumption and average speed setting).
3. Press and hold the multi information dis-
play switch (for about 2 seconds or more)
to switch in sequence from A or 1 (Auto
reset)  M, 2 or P (Manual reset)  A or
1 (Auto reset).
N00557001240
The setting is changed to the selected
reset condition.
Manual reset mode
 If you press and hold the multi informa-
tion meter switch when the average fuel
consumption and average speed are dis-
played, these calculations will be reset to
zero.
 When the following operation is per-
formed, the mode setting changes auto-
matically from manual to auto.
[Except for vehicles equipped with the
F.A.S.T.-key]
Turn the ignition switch to the "ON" posi-
tion from the "ACC", "LOCK" or "OFF"
position.
[For vehicles equipped with the F.A.S.T.-
key]
Change the operation mode to ON from
ACC or OFF.
Auto reset mode
 When the average fuel consumption and
average speed are being displayed, if you
hold down the multi information display
switch, these calculations will be reset to
zero.