3. Insert a screwdriver with a cloth over its
tip into the notch (A) of the cover. Pry
gently as shown to remove the cover.
4. Depress the brake pedal with the right
foot.
5. Insert a screwdriver in the shift-lock
release hole (B). Shift the selector lever to
the "N" (NEUTRAL) position while
pressing the screwdriver down.
Selector lever position display
When the operation mode is put in ON, the
selector lever position is shown on the multi-
information display.
Type 1
Type 2
Warning display
[For vehicles equipped mono-color liquid
crystal display meter]
Automatic transaxle (if so equipped)
When the selector lever position indicator
blinks while you are driving, there could be a
N00513901441
malfunction in the automatic transmission
system or A/T fluid temperature becomes
abnormally high.
NOTE
The "A" indicator on the selector lever posi-
tion display will only blink if there is a prob-
lem with the A/T position switch.
N00514001306
It is not seen during normal driving.
Features and controls
5
5-69