Mitsubishi MOTORS Outlander 2019 Owner's Manual page 273

Indicator light, warning light, and information screen display list (multi information display - Type 1)
Screen
 You try to release the Electric parking brake switch
without depressing the brake pedal.
 The Electric parking brake has been automatically
applied.
 The brake auto hold is automatically canceled.
 The brake auto hold is not available.
 The Electric parking brake is not automatically
applied because there is a fault in the Electric park-
ing brake system.
Cause Do this (Reference)
Refer to "Electric parking brake" on page 5-54.
Refer to "Brake auto hold" on page 5-92.
Refer to "Brake auto hold" on page 5-92.
Refer to "Brake auto hold" on page 5-92.
 When the ignition switch is turned off or the opera-
tion mode is put in OFF, place the selector lever in
the "P" (PARK) position and depress the brake pedal
more firmly than usual with the right foot.
Then, operate the ignition switch or the engine
switch.
 We recommend you to have the brake auto hold sys-
tem inspected by a MITSUBISHI MOTORS Autho-
rized Service Point.
Refer to "Brake auto hold" on page 5-92.
Features and controls
5
5-191