Mitsubishi MOTORS Outlander 2019 Owner's Manual page 196

Adaptive Cruise Control System (ACC) (if so equipped)
NOTE
 The ACC control will not resume after
releasing the brake pedal.
To temporarily accelerate the
vehicle
5
Simply depress the accelerator pedal to tem-
porarily accelerate the vehicle. Releasing the
pedal automatically slows down the vehicle
to the set speed and ACC restarts its control.
WARNING
 The ACC braking control and approach
alarm functions will not work while the
accelerator pedal is depressed.
5-114 Features and controls
NOTE
 The set speed indication on the display turns
to "---" when the accelerator pedal is
depressed. This indication remains as long as
the pedal is in a depressed position.
 In certain conditions, the braking control and
alarming functions of ACC may not work for
a short while after releasing the accelerator
pedal.
N00582800027
To cancel ACC control
There are two ways to cancel the ACC con-
trol.
 By pressing the "CANCEL" switch.
 By depressing the brake pedal.
NOTE
 You can also cancel the ACC control by
pressing the "ACC ON/OFF" switch. If this
switch is pressed while the ACC is "ON",
the ACC will be turned off.
When the ACC is canceled, the "SET" indi-
cator goes off and the following distance indi-
cator turns to the 'standby' display. The front
vehicle indicator also turns to the 'standby'
display when a front vehicle is detected.
N00581700061