Mitsubishi MOTORS Outlander 2019 Owner's Manual page 186

Cruise control (if so equipped)
"SET -" switch
Push down and hold the "SET -" switch (B)
while driving at the set speed, and your speed
will slow down gradually.
When you reach your desired speed, release
the switch. Your new cruising speed is now
5
set.
To slow down your speed in small amounts,
push down the "SET -" switch (B) for less
than approximately 1 second and release it.
Each time you push down the "SET -" switch
(B), your vehicle will slow down by approxi-
mately 1 mph (1.6 km/h).
5-104 Features and controls
Brake pedal
While driving at the set speed, use the brake
pedal, which disengages the cruise control,
then push down the "SET -" switch (B) and
release the switch momentarily to set a new
desired cruising speed.
To temporarily increase or
decrease the speed
To temporarily increase the speed
Depress the accelerator pedal as you would
normally. When you release the pedal, you
will return to your set speed.
NOTE
 In some driving conditions, the set speed
driving may be deactivated. If this happens,
refer to "To activate" on page 5-102 and
repeat the speed setting procedure.
N00541701112