Mitsubishi MOTORS Outlander 2019 Owner's Manual page 206

Forward Collision Mitigation System (FCM) (if so equipped)
If the FCM detects a malfunction in the sys-
tem, either of the following messages will
appear, the indicator will appear on the
information screen of the multi-information
display and the FCM will automatically be
turned off.
If the message remains even after the opera-
5
tion mode is put in "OFF" and then turned
back to "ON", please contact your authorized
Mitsubishi Motors dealer.
5-124 Features and controls
NOTE
 If the sensor or its surrounding area becomes
extremely high temperature when parking
the vehicle under a blazing sun, the "FCM
SERVICE REQUIRED" message
appear.
After the temperature of the sensor or its sur-
rounding area has been in range, if the mes-
sage remains even after restarting the engine,
please contact an authorized Mitsubishi
Motors dealer.
Handling of the sensor
The sensor (A) is located inside the wind-
shield as shown in the illustration.
may
The sensor is shared in the following sys-
tems:
 FCM
 Lane Departure Warning (LDW)
 Automatic high beam system
CAUTION
 To maintain proper performance of the FCM,
LDW and Automatic high beam system;
• Always keep clean the windshield.
If the inside of the windshield where the
sensor is installed becomes dirty or fogged,
contact an authorized Mitsubishi Motors
dealer.
• Do not apply an impact or load on the sen-
sor or its surrounding area.
N00593400094