Mitsubishi MOTORS Outlander 2019 Owner's Manual page 233

Table of Contents

Advertisement

NOTE
 The front-view will not be displayed when
the vehicle speed exceeds approximately 6
mph (10 km/h).
 The display of the view may be delayed dur-
ing switching of the screen.
How to read the screen
In any mode other than the Bird's eye-view
mode, the lines in the screen give the follow-
ing information. Use them only as a guide.
CAUTION
 If the camera and/or its surrounding area
have experienced an impact, the Multi
Around Monitor system may not function
correctly. Have the vehicle inspected by an
authorized Mitsubishi Motors dealer.
Front-view mode
Reference lines for the distance and the vehi-
cle width and upper surface of the front bum-
per (A) are displayed on the screen.
 The Red line (B) indicates approximately
20 inches (50 cm) from the front edge of
the front bumper.
 The Two Green lines (C) indicate the
approximate vehicle width.
 The Orange lines (D) indicates an
expected course when the vehicle moves
forward with the steering wheel turned. It
disappears when the steering wheel is in
the neutral position.
 The approximate distance from the vehi-
cle body is as follows:
N00587600033
1- Approximately 39 inches (100 cm) from
the front edge of the front bumper
NOTE
 When the expected course lines are dis-
played in the front-view, the expected course
lines are also displayed in the bird's eye-
view (Front: solid line, Rear: broken line).
Multi Around Monitor (if so equipped)
NOTE
Rear-view mode
Reference lines for the distance and the vehi-
cle width and upper surface of the rear bum-
per (A) are displayed on the screen.
 The Red line (B) indicates approximately
20 inches (50 cm) behind the rear edge of
the rear bumper.
 The Two Green lines (C) indicate the
approximately vehicle width.
 The Orange line (D) indicates an expected
course when the vehicle is reserved with
the steering wheel turned. It disappears
when the steering wheel is in the neutral
position.
 The approximate distance from the vehi-
cle body is as follows:
Features and controls
5
N00587700021
5-151

Advertisement

Table of Contents
loading

Table of Contents