Mitsubishi MOTORS Outlander 2019 Owner's Manual page 219

To turn on the LDW, press the LDW switch.
The "LDW" indicator will appear on the
information screen of the multi information
display.
To turn off the LDW, press the LDW switch.
The "LDW" indicator on the information
screen of the multi information display will
then go out.
To return the LDW to "ON", press the LDW
switch again.
Lane Departure Warning System (LDW) (if so equipped)
Operation of the LDW
The LDW, when turned ON, is capable of
recognizing the lane in which your vehicle is
travelling and issuing an audible warning
when your vehicle begins to leave that travel
lane. When operating, the "LDW" indicator
on the multi-information display will be
changed to indicator (green). The LDW
will not operate, however, and the "LDW"
indicator will be appeared if any of following
conditions have occurred:
 The vehicle speed is less than approxi-
mately 38 mph (60 km/h).
 The turn signal lever is being operated or
has been operated in the past 7 seconds.
 The hazard warning light is being oper-
ated or has been operated in the past 7
seconds.
Lane departure warning
N00581100078
While the "LDW" indicator in the informa-
tion display is lit in green, if your vehicle is
leaving or has left the lane, a buzzer will
sound intermittently, "LANE DEPARTURE"
will appear in the information display and
the indicator will be flashing in amber.
NOTE
 The warnings will not continue for more than
3 seconds, even if your vehicle continues
leaving the lane.
 If the lane markers are only on one side of
the road, the LDW will operate only for the
appropriate side where the lane marker is
drawn.
WARNING
 The LDW will not function when no lane
marker exists, such as at an intersection
or near a toll booth.
Features and controls
N00581200040
5
5-137