Mitsubishi MOTORS Outlander 2019 Owner's Manual page 255

Changing the language on other
system to match the multi infor-
mation display
The language used in Multi Around Monitor
(if so equipped) can be changed automatically
to the same language as that shown in the
multi information display.
1. Press and hold the multi information dis-
play switch (for about 2 seconds or more)
to switch from the setting mode screen to
the menu screen. Refer to "Changing the
function settings" on page 5-169.
2. Lightly press the multi information dis-
play switch to select "
cooperative control).
3. Press and hold the multi information dis-
play switch to switch from A/1 (language
cooperation: enabled) to M/2/P (language
cooperation: disabled), or from M/2/P to
A/1. The setting is changed to the selected
N00529801331
condition.
NOTE
 If the battery is disconnected, the language
cooperative control is automatically set to
"A or 1" (language cooperation: enabled).
 The language cooperation setting can be
switched in the following manner.
• When "A or 1" (language cooperation:
enabled) has been selected, the language for
Multi Around Monitor (if so equipped) is
automatically changed to the language
" (language
selected for the multi information display.
However, this changing function may not
work depending on the language selected
for the multi information display.
• When "M, 2 or P" (language cooperation:
disabled) has been selected, the language
for Multi Around Monitor (if so equipped)
is not automatically changed to match the
language selected for the multi information
display.
 The language on the audio system's display
does not automatically change when you
select A or 1 (language cooperation:
enabled) in the language cooperation control.
Multi Information display - Type 1
Operation sound setting
You can turn off the operation sounds of the
multi information display switch and rheostat
illumination button.
1. Press and hold the multi information dis-
play switch (for about 2 seconds or more)
to switch from the setting mode screen to
the menu screen.
Refer to "Changing the function settings"
on page 5-169.
2. Lightly press the multi information dis-
play switch to select "
sound setting).
3. Press and hold the multi information dis-
play switch (for about 2 seconds or more)
to switch from ON (operation sound on)
to OFF (operation sound off), or from
OFF to ON.
The setting is changed to the selected con-
dition.
NOTE
 If the battery is disconnected, the memory of
the operation sound setting is erased and is
automatically set to "ON" (operation sound
on).
Features and controls
N00557401156
5
" (operation
5-173