Mitsubishi MOTORS Outlander 2019 Owner's Manual page 422

Replacement of light bulbs
Side turn signal lights
equipped)
NOTE
 The side turn signal lights use an LED
instead of the bulb.
Check with an authorized Mitsubishi Motors
dealer or a repair facility of your choice
when the light needs to be repaired or
replaced.
Front fog lights (Halogen bulb
9
type)
1. Insert a straight blade (or minus) screw-
driver with a cloth over its tip at the points
indicated by arrows and pry gently to
remove the cover (A).
9-38 Vehicle care and maintenance
2. Remove the 3 screws (B) and remove the
(if so
light unit.
N00943501189
NOTE
 When unfastening the screws or the fog
light, be careful not to move the beam posi-
N00943601920
tion adjustment screw (C).
3. While holding down the tab (D), pull out
the socket (E).
4. Turn the bulb (F) counterclockwise to
remove it.
5. To install the bulb, perform the removal
steps in reverse.