Mitsubishi MOTORS Outlander 2019 Owner's Manual page 211

NOTE
• When driving on the entrance and outlet of
the tunnel or very near the wall or near the
evacuation area inside the tunnel.
• When turning at an intersection in a town
area.
• Under adverse weather conditions (rain,
snow, sand storms etc.).
• When your vehicle drives with blowing up
the water, snow or sand etc. on the road.
• When driving near a curb, pot hole and
tramline.
 Set the BSW to OFF when towing.
 The Blind Spot Warning light in the outside
rearview mirror may not be visible due to
strong direct sunlight or the glare from the
headlamps of vehicles behind you during
night driving.
System problem warning
If a problem occurs with the system, a visual
warning specific to the type of the problem is
given together with an audible alarm.
The warnings are combined with the Rear
Cross Traffic Alert (RCTA) system.
Blind Spot Warning (BSW) (with Lane Change Assist) (if so equipped)
When there is a malfunction in the
system or the sensor
When the warning display appears, the BSW
does not operate normally because there are
some malfunctions in the system or the sen-
sor. Have the vehicle inspected at an autho-
rized Mitsubishi Motors dealer as soon as
possible.
NOTE
 When the warning display appears, the BSW
will be deactivated.
N00592400039
When the sensor is temporarily
not available
N00592700032
When the warning display appears, the sensor
is temporarily not available for some reason
such as the environmental condition or
increase of the sensor temperature. When the
warning display does not disappear after
waiting for a while, contact an authorized
Mitsubishi Motors dealer.
Features and controls
N00592800033
5
5-129