Mitsubishi MOTORS Outlander 2019 Owner's Manual page 185

2. Accelerate or decelerate to your desired
speed, then push down and release the
"SET -" switch (B) when the indica-
tor/indicator display is illuminated. The
vehicle will then maintain the desired
speed.
The "SET" indicator appears on the infor-
mation screen in the meter cluster. (For
vehicles equipped with color liquid crys-
tal display meter)
NOTE
 When you release the "SET -" switch (B),
the vehicle speed will be set.
To increase the set speed
There are two ways to increase the set speed.
"RES +" switch
Push up and hold the "RES +" switch (C)
while driving at the set speed, and your speed
will then gradually increase.
When you reach your desired speed, release
the switch. Your new cruising speed is now
set.
To increase your speed in small amounts,
push up the "RES +" switch (C) for less than
approximately 1 second and release it.
Each time you press the "RES +" switch (C),
your vehicle will go approximately 1 mph
(1.6 km/h) faster.
N00518501413
Cruise control (if so equipped)
Accelerator pedal
While driving at the set speed, use the accel-
erator pedal to reach your desired speed and
then push down the "SET -" switch (B) and
release the switch momentarily to set a new
desired cruising speed.
To decrease the set speed
There are two ways to decrease the set speed.
Features and controls
5
N00518601342
5-103