USB input terminal
Back of floor console box (if so equipped)
5
How to connect a USB memory
device
1. Park your vehicle in a safe place and turn
the ignition switch to the "LOCK" posi-
tion or put the operation mode in OFF.
2. Open the USB input terminal cover.
5-230
Features and controls
3. Connect a commercially available USB
connector cable (A) to the USB memory
device (B).
4. Connect the USB connector cable to the
USB input terminal.
N00566801215
NOTE
Do not connect the USB memory device to
the USB input terminal directly.
The USB memory device may be damaged.
5. To remove the USB connector cable, turn
the ignition switch to the "LOCK" posi-
tion or put the operation mode in OFF
first and perform the installation steps in
reverse.
How to connect an iPod
1. Park your vehicle in a safe place and turn
the ignition switch to the "LOCK" posi-
tion or put the operation mode in OFF.
2. Open the USB input terminal cover.
3. Connect the connector cable to the iPod.
NOTE
Use a genuine connector cable from Apple
Inc.
4. Connect the connector cable to the USB
input terminal.
5. To remove the connector cable, turn the
ignition switch to the "LOCK" position or
put the operation mode in OFF first and
perform the installation steps in reverse.
N00566901245