Mitsubishi MOTORS Outlander 2019 Owner's Manual page 197

Table of Contents

Advertisement

In any of the situations listed below, the ACC
control is automatically canceled, a buzzer
sounds and a message is shown in the multi-
information display.
 When your vehicle stops.
 When the ASC is turned off.
 While ABS, ASC or TCL is activated.
 When the selector lever is in a position
other than "D" (DRIVE) and "Ds"
(DOWNSHIFT & SPORTY DRIVING).
 When the parking brake is applied.
When the ACC system determines that its
performance has been degraded, a buzzer will
sound and a message will be displayed in the
multi information display.
This can occur when
 Foreign objects, such as dirt, snow or ice,
adhere to the surface of the radar sensor.
 In adverse weather conditions, such as
rain, snow or sand storms, etc.
 A front vehicle or an oncoming vehicle is
splashing water, snow or dirt.
 Driving on a nonbusy road with a few
vehicles and obstacles in front.
 The brake system is overheating due to
continuous brake control on long down-
hill slope.
Adaptive Cruise Control System (ACC) (if so equipped)
If the display keeps showing the message,
there is a possibility that the ACC has a mal-
function. Contact your authorized Mitsubishi
Motors dealer.
When the ACC system detects an abnormal-
ity in the system, the ACC system will be
turned off, a buzzer will sound and a message
will be displayed in the multi information dis-
play. If the message remains after the opera-
tion mode has been turned to the "OFF"
position and then turned back to the "ON"
position, contact your authorized Mitsubishi
Motors dealer.
To resume the control
After the ACC control has been canceled with
the ACC turned on, the ACC control can be
resumed by pushing up and releasing the
"RES +" switch.
Features and controls
5
N00581800059
5-115

Advertisement

Table of Contents
loading

Table of Contents