Indicator light, warning light, and information screen display list (multi information display - Type 1)
Screen
5
5-192
Features and controls
Cause
The brake auto hold system does not turn on because
the driver's seat belt is not fastened.
The brake auto hold system does not turn off because
the brake pedal is not pressed.
There is a fault in the engine oil circulation system.
There is a fault in the charging system.
There is a fault in the SRS airbag or the pre-tensioner
system.
Do this (Reference)
Press the brake auto hold switch after fastening the
driver's seat belt.
Refer to "Brake auto hold" on page 5-92.
Depress the brake pedal more firmly than usual with
the right foot. Then, press the brake auto hold switch.
Refer to "Brake auto hold" on page 5-92.
Park your vehicle in a safe place as soon as possible
and contact an authorized Mitsubishi Motors dealer
or a repair facility of your choice to have the system
checked.
Refer to "Oil pressure warning display" on page
5-209.
Park your vehicle in a safe place as soon as possible
and contact an authorized Mitsubishi Motors dealer
or a repair facility of your choice for assistance.
Refer to "Charging system warning display" on page
5-209.
Contact an authorized Mitsubishi Motors dealer or a
repair facility of your choice to have the system
checked, immediately.
Refer to "SRS airbag/Pre-tensioner system warning"
on page 4-41.