Mitsubishi MOTORS Outlander 2019 Owner's Manual page 62

Child restraint systems
WARNING
 When using a child restraint in a rear
seating position, always
instructions provided with that restraint
to make sure it is compatible with this
4 vehicle and to understand how to properly
install it.
Child restraints, including booster seats,
come in different sizes and configurations.
Depending on where you place these child
restraints, and depending on their size and
configuration, you may not be able to
access or properly use one or more adja-
cent seat belt assemblies. If this occurs,
the adjacent seating position or positions
should not be used. Failure to use a seat
belt or improper use of a seat belt can
result in serious injury or death should a
crash occur.
Installing a child restraint sys-
tem using the seat belt (with
emergency/automatic locking
mechanism)
With the exception of the driver, the seat belt
in all other seating positions can be converted
from normal Emergency Locking Retractor
(ELR) mode, to Automatic Locking Retractor
(ALR) mode. This means that when you pull
the seat belt fully out of the retractor, the
retractor will switch to its ALR child restraint
4-32 Seat and restraint systems
installation function. Always use the ALR
child restraint installation function when you
install a child restraint system using the seat
review the
belt.
Children 12 years old and under should
always be restrained in the rear seat, when-
ever possible, although the front passenger
seat belt can also be converted to ALR mode.
WARNING
 When you install a child restraint system
using the seat belt, always make sure the
retractor has been switched to the ALR
child restraint installation function. The
ALR function will keep the child restraint
system tightly secured to the seat.
Failure to convert the retractor to the
ALR function may allow the child
restraint system to move forward during
sudden braking or an accident, resulting
in serious injury or death to the child or
other occupants.
N00407301553
WARNING
 When using a child restraint in a rear
seating position, always
instructions provided with that restraint
to make sure it is compatible with this
vehicle and to understand how to properly
install it.
Child restraints, including booster seats,
come in different sizes and configurations.
Depending on where you place these child
restraints, and depending on their size and
configuration, you may not be able to
access or properly use one or more adja-
cent seat belt assemblies. If this occurs,
the adjacent seating position or positions
should not be used. Failure to use a seat
belt or improper use of a seat belt can
result in serious injury or death should a
crash occur.
Installation
1. Place the child restraint system on the seat
where you wish to install it.
To help assure proper fitting of the child
restraint system, always remove the head
restraint.
When installing the front-facing child
restraint system on the second row seat,
adjust the angle of the second row seat-
back to the most upright position.
review the