Mitsubishi MOTORS Outlander 2019 Owner's Manual page 192

Adaptive Cruise Control System (ACC) (if so equipped)
5
When the front vehicle stops, the ACC will
automatically apply the brakes to stop your
vehicle.
A few seconds after your vehicle has stopped,
the ACC will release the brakes and your
vehicle will start to move or creep slowly.
You must apply the brakes to keep your vehi-
cle stationary.
5-110 Features and controls
NOTE
 If the brake pedal is not depressed within 2
seconds after your vehicle has been stopped
by the ACC, a warning buzzer will sound,
the above warning will be shown in the multi
information display to alert the driver, and
the ACC control will be canceled.
 When depressing the brake pedal while the
automatic brake is applied, the brake pedal
will feel firm. This is normal. Depress the
brake pedal harder to apply greater braking
force.
 During the automatic braking, operation
sounds may be heard. This is normal.
WARNING
 Never leave the vehicle while it is being
stopped by the ACC.
When the ACC no longer detects a vehicle in
front, the buzzer will sound, the vehicle sym-
bol in the display will disappear and your
vehicle will slowly accelerate to the set
speed.
WARNING
 Your vehicle may accelerate up to the set
speed in the following situations. Apply
the brake, if necessary, to slow down.
• When your vehicle no longer follows the
vehicle in front, e.g. at a freeway exit or
when your vehicle or the vehicle in front
changes its lane.
• When driving on a curve.